Conventional  Spray Guns

Item # # L300C


The LYNX 300C is a fine finish conventional air spray gun for achieving the ultimate in fine atomization. Designed for production use, the L300C is perfect for wood, automotive or any fine finish application. This gun offers the user a self-adjusting needle and air valve packing, air adjusting valve, lightweight and rugged construction. The LYNX 300C gun comes standard with stainless steel fluid passages and incorporates our 12-point plenum design. This patented design delivers smaller and more uniform material particles providing an even, smooth finish. For conventional spray this gun cannot be beat.

Custom Built To Your Specs and Independently Tested




Specifications

Material Type Very Thin (inks, dyes, solvents, stains) [less than 16 seconds Zahn#2]
Thin (lacquers, enamels, primers, sealers) [16-20 seconds Zahn#2]
Medium (automotive base coat, enamels, primers, epoxies, urethanes, automotive clear coat) [21-30 seconds Zahn#2]
Heavy (heavy body primers, high solid enamels, high solid automotive coatings, adhesives) [over 30 seconds Zahn#2]

Fluid Orifice x Air Cap x Maximum Pattern Thin - 1.0 mm x 2010 x 11 inches (standard)
Very Thin - 0.8 mm x 2013 x 11 inches
Very Thin - 1.0 mm x 2013 x 11 inches
Thin - 0.8 mm x 2013 x 11 inches
Thin - 1.0 mm x 2013 x 11 inches
Thin - 1.3 mm x 2013 x 11 inches
Medium - 1.3 mm x 2013 x 11 inches
Medium - 1.4 mm x 2014 x 11 inches
Medium - 1.6 mm x 2016 x 11 inches
Heavy - 1.4 mm x 2014 x 11 inches
Heavy - 1.6 mm x 2016 x 11 inches

Air Inlet 1/4" NPS (m)

Fluid Inlet 3/8" NPS (m)

Weight 20 oz.