Conventional  Spray Guns

Item # T100C


The T100C is an economical general purpose conventional air spray gun for spraying a wide range of coatings. Designed for production use, the TOMCAT is perfect for all coatings from thin to thick, stains to glue. This gun features a self-adjusting needle packing, inexpensive nozzle replacement and rugged construction.




Specifications

Material Type Very Thin (inks, dyes, solvents, stains) [less than 16 seconds Zahn#2]
Thin (lacquers, enamels, primers, sealers) [16-20 seconds Zahn#2]
Medium (automotive base coat, enamels, primers, epoxies, urethanes, automotive clear coat) [21-30 seconds Zahn#2]
Heavy (heavy body primers, high solid enamels, high solid automotive coatings, adhesives) [over 30 seconds Zahn#2]

Fluid Orifice x Air Cap x Maximum Pattern Medium - 1.2 mm x 2263 x 14 inches (standard)
Very Thin - 0.6 mm x 2163 x 8 inches
Very Thin - 0.7 mm x 2163 x 8 inches
Very Thin - 0.6 mm x 2166 x 9 inches
Very Thin - 0.7 mm x 2166 x 9 inches
Very Thin - 0.6 mm x 2266 x 12 inches
Very Thin - 0.7 mm x 2266 x 12 inches
Thin - 0.6 mm x 2163 x 8 inches
Thin - 0.7 mm x 2163 x 8 inches
Thin - 1.0 mm x 2163 x 8 inches
Thin - 0.6 mm x 2366 x 14 inches
Thin - 0.7 mm x 2366 x 14 inches
Thin - 1.0 mm x 2366 x 14 inches
Thin - 0.6 mm x 2466 x 13 inches
Thin - 0.7 mm x 2466 x 13 inches
Thin - 1.0 mm x 2466 x 13 inches
Medium - 1.3 mm x 2263 x 14 inches
Medium - 1.5 mm x 2263 x 14 inches
Medium - 1.8 mm x 2263 x 14 inches
Medium - 1.2 mm x 2266 x 10 inches
Medium - 1.3 mm x 2266 x 10 inches
Medium - 1.5 mm x 2266 x 10 inches
Medium - 1.8 mm x 2266 x 10 inches
Medium - 1.2 mm x 2266-3 x 15 inches
Medium - 1.3 mm x 2266-3 x 15 inches
Medium - 1.5 mm x 2266-3 x 15 inches
Medium - 1.8 mm x 2266-3 x 15 inches
Medium - 1.2 mm x 2466 x 13 inches
Medium - 1.3 mm x 2466 x 13 inches
Medium - 1.5 mm x 2466 x 13 inches
Medium - 1.8 mm x 2466 x 13 inches
Heavy - 1.5 mm x 2466 x 13 inches
Heavy - 1.8 mm x 2466 x 13 inches
Heavy - 2.2 mm x 2167 x 12 inches
Heavy - 2.2 mm x 2267 x 15 inches
Heavy - 2.8 mm x 2168 x 12 inches

Air Inlet 1/4" NPS (m)

Fluid Inlet 3/8" NPS (m)

Weight 19 oz.

Standard Setup 1.2 mm x 2263